Vision VHD-800 Manual de usuario descargar pdf (Pagina 25)

[Dual Stream]

It is a setup for network video transmission.

1. CAMERA

The channel on the DVR.

2. RESOLUTION

Select the resolution for network transmission in real-time.

The selectable resolutions are the follows.

A. CIF: 352*240(NTSC), 352*288(PAL)

B. Half D1: 720*240(NTSC), 720*288(PAL)

C. D1: 720*480(NTSC), 720*576(PAL

D. Dual Stream resolution must be less than the recording resolution.

3. FPS

A. Select the transmission speed for each channel.

B. Before set up, please check the [REMAINING FPS], if it is “0”, the recording speed setup is not

available.

4. QUALITY

Select the transmission video quality for each channel.

5. AUDIO

A. Setup the network audio transmission for each channel.

B. It should follow the audio recording channel setting.

6. REMAINING FPS

It shows the remaining recordable frame per CIF resolution.

7. NETWORK LIMIT

A. It allows user to reduce the image quality for transmission by percentage of the standard quality.

B. The lower percentage requires the smaller network bandwidth but the image quality will be worse. On

the contrary, the higher percentage requires the bigger network bandwidth but the image quality will

be better

C. The highest image quality(100%) is same to the standard image quality of record setting.

Note

The network stream resolution should be set equal to or smaller than recording resolution.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31

Sin comentarios

Vision VHD-800 Manual de usuario Pagina 25