Vision VISION-64 Guía de usuario descargar pdf (Pagina 27)

Vision-64 User Guide

Issue 1.02

System > Holidays >

Start / Stop Day

MENU 7-6-1

This menu allows you to program the start date and the stop date

of each holiday period.

1. Enter [MENU] + [7] + [6] + [1].

A list of holiday names will display on the keypad.

2. Use the [

↑] and [↓] keys to select the holiday that you want

to change, then press [OK] to select. Alternatively, you can

enter the holiday number, then press [OK].

The keypad will display the holiday start date:

Holiday Dates H001

Start Date Stop Date

01 Jan 01 Jan

Press ◄► OK to SAVE

3. To program the holiday start date and stop date, use the [↑]

and [↓] keys to scroll the cursor left and right between the

holiday day and month. Use the [←] and [→] keys to scroll

the day and month.

4. Press [OK] to save and exit, or press [MENU] to exit without

saving.

System > System Options >

Keypad Hi/Lo Temp

MENU 7-7-3

The keypad Hi/Lo temperature allows you to program the

minimum (0 °C) and maximum (50 °C) temperatures the keypad

will monitor (tolerance = +/- 2 °C).

If the temperature falls below the minimum temperature, the

keypad will display ‘Low Temp

˚xx’. If the temperature increases

above the maximum temperature, the keypad will display ‘High

temp ˚xx’.

(xx = programmed temperature to be monitored).

1. Press [MENU] + [7] + [7] + [3].

The keypad will display the current temperature settings.

Keypad Hi/Lo Temp

High Temp Low Temp

00 00

Press ◄► OK to SAVE

2. Use the [↑] and [↓] keys to program the ‘High’ and ‘Low’

temperatures. To toggle between the ‘High’ and ‘Low’

temperature, use the [←] and [→] keys (Range = 0°C to

50°C).

3. Press [OK] to save and exit, or press [MENU] to exit without

saving.

System > System Testing >

Walk Test All Zones

MENU 7-9-0

This menu allows you to test all zones within an area at the same

time.

1. Press [MENU] + [7] + [9] + [0].

The keypad will display a list of areas that are available to

walk test zones.

2. Use the [

↑] and [↓] keys to select the area that you want to

do walk test, then press [OK] to select. Alternatively, you

can enter the area number, then press [OK].

The keypad will scroll all zones that you can test.

To test Z001 open/close

Zone 1

Press OK or MENU

To test Z002 open/close

Zone 2

Press OK or MENU

3. Open and close each zone that needs to be tested. A zone

that has been successfully tested will no longer scroll on the

keypad display.

When all zones have been tested, the keypad will display:

Selected zones have been

Tested OK

Press OK or MENU

4. Press [OK] to save and exit, or press [MENU] to exit without

saving.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

Vision VISION-64 Guía de usuario Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Vision VISION-64