Vision VHD-800X Manual de usuario descargar pdf (Pagina 33)

3.2.4. Motion Alarm

Motion alarm is to start the recording when motion is detected by installed camera based on the

area setting. The system will trigger alarm signal via the selected sensor-out channel.

On/Off

Turn on or turn off the motion alarm.

Relay

Select the associated alarm output.

I. Rec(Intensive Recording)

When alarm is triggered, system instantly assigns “remaining fps” to alarm-triggered channel and

increases recording speed to maximum fps within the remaining fps.

Period

Set the recording period from the start of motion detection. During this period, the corresponding

camera image will record according to the frame set. The recording stops and alarm output is

turned off when the setting period is elapsed.

PreRec

Set recording period just before perceiving motion is detected.

The system records for a certain period of time prior to the time that motion is detected, so that

user can search video even before alarm is triggered.

Skip

User can set the time difference from the motion detection to the next motion detection. It can be

set in between 1~15seconds. If the time is set, the next motion which is detected within the set

time doesn’t activate alarm.

Notification

User can select how to be alerted upon motion is detected by clicking “Notification” button.

The system will generate buzzer sound in the selection of “Buzzer” and/or make pop-up screen of

the camera in the selection of “Full Screen”. The system can send mail in the selection of “E-Mail”.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

Sin comentarios

Vision VHD-800X Manual de usuario Pagina 33