Vision Multi Axis Especificaciones descargar pdf (Pagina 22)

22 Multi Axis Engraver Operating Manual

Next, loosen the tilt adjustment lock screw shown below in figure 3.18 screws approximately 1 turn.

(Figure 3.18) The tilt adjustment lock screw

You will now need to tilt the clamping assembly up or down to align the edge of the material you are engraving with the

spindle. See figure 3.19 below.

(Figure 3.19) Levelling the engraved object

Once the object is parallel to the spindle, tighten the tilt locking knob.

Next, adjust your spindle and cutter. For help with setting the spindle and cutter, please see the section on adjusting the

spindle later in this chapter.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 40 41

Sin comentarios

Vision Multi Axis Especificaciones Pagina 22